|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-mido.spec
|
|
|
|
[-]
[+]
|
Changed |
_service
^
|
| @@ -2,7 +2,7 @@
<service name="tar_git">
<param name="url">https://github.com/piggz/droid-config-mido.git</param>
<param name="branch">master</param>
- <param name="revision">155b351fba8bcd89322912114bf1301f2b1444e9</param>
+ <param name="revision">e22dfde0b85b160c3852838a9aa1577f5b605d82</param>
<param name="token"/>
<param name="debian">N</param>
<param name="dumb">N</param>
|
|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-mido-0.3.0.tar.bz2/sparse/etc/ohm/plugins.d/accessories.ini
^
|
| @@ -1,4 +1,4 @@
eci-probe-delay = 2500
disable-incompatible-quirk = true
jack-match = msm8953-snd-card-mtp Headset Jack
-jack-device = /dev/input/event6
+jack-device = /dev/input/event7
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-mido-0.3.0.tar.bz2/sparse/etc/sensorfw/sensord.conf.d/60-sensor-selection-overrides.conf
^
|
| @@ -0,0 +1,26 @@
+ [available]
+
+; Sensors that are disabled by default.
+; -> Enable as appropriate
+
+;humiditysensor=True
+magnetometersensor=True
+;pressuresensor=True
+rotationsensor=True
+;stepcountersensor=True
+;tapsensor=True
+;temperaturesensor=True
+
+; Sensors that should/can be enabled/disabled based on
+; hw settings config - or are enabled if sensorfwd is
+; built without ssu-sysinfo support.
+; -> Override as appropriate.
+
+accelerometersensor=True
+;alssensor=False
+compasssensor=True
+gyroscopesensor=True
+;lidsensor=False
++orientationsensor=True
+proximitysensor=True
+
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-mido-0.3.0.tar.bz2/sparse/usr/share/csd/settings.d/hw-settings.ini.txt
^
|
| @@ -0,0 +1,94 @@
+[features]
+AudioMic1=1
+AudioMic2=1
+BackCamera=1
+BackCameraFlash=1
+Backlight=1
+Battery=1
+Bluetooth=1
+CellularData=1
+CellularVoice=1
+ECompass=1
+FmRadio=1
+FrontCamera=1
+FrontCameraFlash=0
+GPS=1
+CellInfo=1
+GSensor=1
+Gyro=1
+Hall=1
+Fingerprint=1
+Headset=1
+Key=1
+LCD=1
+LED=1
+LightSensor=1
+Loudspeaker=1
+TOH=0
+ProxSensor=1
+Receiver=1
+SDCard=1
+SIM=1
+StereoLoudspeaker=1
+Touch=1
+TouchAuto=0
+UsbCharging=1
+UsbOtg=1
+Vibrator=1
+Wifi=1
+
+[BackCamera]
+Flash=1
+# Focus modes:
+# 1 == Manual
+# 2 == Hyperfocal
+# 4 == Infinity
+# 8 == Auto
+# 16 == Continious
+# 32 == Manual
+#FocusMode=8
+
+#[FrontCamera]
+#FocusMode=2
+
+# Each RunInTest can be configured to have a pass rate requirement.
+# By default we're expecting 100% pass rate.
+[FrontBackCamera]
+RunInTestPassRateRequirement=0.95
+
+[LED]
+# Supported types are: Binary, White, AmberGreen, RedGreen, and RGB
+LedType=RGB
+
+[SIM]
+ModemCount=2
+
+[FmRadio]
+DefaultFrequency=97.7
+InputDevice=input-fm_tuner
+
+# Defaults should be fine for most of the devices,
+# but in case one wants to loosen or stricten the defaults
+# it can be done here.
+#[GSensor]
+#MinY=-1.0
+#MaxY=1.0
+#MinX=-1.0
+#MaxX=1.0
+#MinZ=8.8
+#MaxZ=10.8
+
+# As for GSensor, default should be fine, but if need adjustment
+# Min and Max values set min and max for all axis X, Y and Z
+#[Gyro]
+#Min=-1.3
+#Max=1.3
+
+[Battery]
+VoltageTest=False
+
+[Audio]
+RecordTopDevice=input-builtin_mic
+RecordBottomDevice=input-builtin_mic
+RecordTopDeviceChannel=left
+RecordBottomDeviceChannel=right
|
